Heat

Technology Instructions

SEELAND HEAT TECHNOLOGY INSTRUCTIONS

When in use, Seeland’s Heat products must be connected to a power bank, but it is important to note that power banks vary considerably. Some have on/off buttons, while others have power-saving functions.

Such differences can affect how your product performs for you. Consequently, we have assembled some useful information to help you get the most out of your Seeland Heat product.

How to use a Seeland Heat product without using our App:

1. Connect your Seeland Heat product to a power bank. The button on the product will turn light blue, indicating the lowest Heat setting.

2. Set the Heat to the desired temperature. Orange is for medium temperature and red is for the highest temperature.

3. If you have a power bank with a power-saving function, please note the following: If the product has been set to a higher temperature and you reduce it to a lower one, the power bank may turn itself off. If this happens to you, wait until your Seeland Heat product has cooled down and then turn it on again by pressing the on/off button or removing and reinserting the power bank connector.

How to use a Seeland Heat product in conjunction with our App:

1. Download the i-Warm 4 Control App and open it. Read the set-up guide and then close it by pressing the X button.

2. Connect your Seeland Heat product to a power bank. The button on the product will turn light blue, indicating the lowest Heat setting.

3. Hold down the button on the Seeland Heat product until it blinks dark blue.

4. Press the wheel in the App (tap to connect), which will pair the product with the App.

5. Set-up is now complete. You can adjust the Heat by simply turning the wheel in the App.

6. If you have a power bank with a power-saving function, please note the following: If the product has been set to a higher temperature and you reduce it to a lower one, the power bank may turn itself off. If this happens to you, wait until your Seeland Heat product has cooled down and then turn it on again by pressing the on/off button or removing and reinserting the power bank connector. You then need to pair the product with the App again.

If you are unsure if your power bank has a power-saving function, check with your retailer. We recommend using a 10,000 mAh power bank with an output of 5V/2A. Seeland’s power bank has a built-in power-saving function.

Heat products

Seeland Heat jacket

Black

389.95 EUR

Seeland Heat jacket

389.95 EUR

Seeland Heat waistcoat

Black

319.95 EUR

Seeland Heat waistcoat

319.95 EUR

Seeland Heat Power bank

The Seeland Power Bank contains a Lithium-Polymer battery with a capacity of 10,000mAh and input/output of 5V/2.0A. The charge time is around 6 hours and the power bank can be recharged approximately 500 times. The power bank can be used at temperatures between -10C and 45C. A micro-USB charging cable is supplied, and, along with the USB output port, the power bank incorporates an LED indicator to show the battery’s level of charge. The power bank features protection against short circuits, over-voltage, incorrect connection and overheating. When not in use, it goes automatically into standby to save battery power.

69.95 EUR

Seeland Heat Power bank

69.95 EUR